Baldor Electric IDCSWDM3558 2 Hp, 1800 Rpm, 56C Fr, 230/460 Vac, 3 Ph, TEFC, C-Face, Foot Mounted, Paint Free inverter Rated Washdown Motor

IDCSWDM3558 2 Hp, 1800 Rpm, 56C Fr, 230/460 Vac, 3 Ph, TEFC, C-Face, Foot Mounted, Paint Free inverter Rated Washdown Motor Engineering Data Output 2.000 hp Phase 3 Synchronous Speed 1,800 rpm Frequency 60.00 Hz Voltage 230 V 460 V Frame Material Stainless Steel Frame 56C XP Class and Group NONE XP Division Not Applicable Brand Baldor-Reliance Agency Approvals CSA UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type POLYREX EM (-20F +300F) Blower None Current 5.8 A @ 230 V 2.9 A @ 460 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Efficiency @ 100% Load 86.5% Feedback Device No feedback Front Face Code Standard Front Shaft Indicator None Heater Indicator No heater High Voltage Full Load Amps 2.9 A Insulation Class H Inverter Code Not inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 4,500 rpm Motor Lead Exit KO Box Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Lead Termination Flying Leads Motor Standards NEMA Motor Type 3528M Number of Poles 4 Overall Length 13.24 in Power Factor 75 Product Family Wash Down Paint Free Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1.00 Shaft Diameter 0.625 in Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1,750 rpm Speed Code Single Speed Starting Method Direct on line Thermal Device - Bearing NONE (OLD) Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None